Hino DX3 + DX2 — Hino Truck Diagnostic Software

Hino DX3 and DX2 Diagnostic Explorer software helps truck repair shops, fleet technicians and independent mechanics diagnose supported Hino commercial vehicles from a Windows laptop. Use it to read and clear diagnostic trouble codes, monitor and graph live data, run active tests and perform supported service functions through a compatible RP1210 diagnostic adapter.

Both Hino DX3 and the legacy Hino DX2 (DXII) application are included. We install and configure the software remotely via TeamViewer and provide technical support after installation.

Important compatibility note: For North American vehicles, Hino states that DX3 supports Hino cab and chassis electrical systems from model year 2005 to present and Hino engines from 2005 through 2021. DX3 does not communicate with Cummins engine ECUs. For engine diagnostics on a Hino truck equipped with a Cummins engine, use Cummins INSITE diagnostic software. DX3 may still be required for supported Hino cab and chassis modules.

Hino DX3 Diagnostic Software Functions

• Read and clear DTCs from supported vehicle control modules
• View, record and graph live data from multiple sensors and parameters
• Run active tests and component activation where the ECU supports the function
• Perform DPR/DPF and SCR service procedures supported by the vehicle
• Reset learned values and maintenance data when the selected ECU permits it
• Carry out injector calibration, fuel priming and related engine service functions on supported Hino engines
• Change supported vehicle parameters, including selected PTO, idle, speed and protection settings
• Save diagnostic sessions and reports for shop records and troubleshooting

Available tests, adjustments and programming functions vary by truck, model year, market, ECU and access level. Module programming is not guaranteed and may require separate manufacturer credentials or an active subscription.

Hino DX3 vs. DX2 vs. Cummins INSITE

Supported Hino Trucks and Engines

Common applications include Hino 155, 195, 238, 258, 268 and 338 trucks in North America, plus supported Hino 300, 500 and 700 Series vehicles in other markets. Hino engine families commonly serviced with Diagnostic Explorer include J05E, J08E, A09C and E13C.

Coverage outside North America varies. Before ordering, send us the truck model, model year, market and engine type. A VIN is helpful when you need a precise compatibility check.

Compatible Diagnostic Adapters

• NEXIQ USB-Link 3
• NEXIQ USB-Link 2
• NEXIQ USB-Link 1
• Dearborn DPA 5
• Noregon DLA 3.0

A diagnostic adapter and the correct vehicle cable are required and are not included with this software listing. If you already own an interface, use our diagnostic interface compatibility finder before ordering.

Computer Requirements

• Windows 10 or Windows 11, 64-bit
• Intel Core i5 or comparable processor recommended
• 8 GB RAM recommended
• At least 20 GB of available storage
• USB port for the diagnostic adapter
• Stable internet connection during remote installation

Contact us before ordering if you use a different Windows configuration or require a specific interface language.

What Is Included

• Hino DX3 Diagnostic Explorer software
• Hino DX2 / DXII for supported legacy applications
• Remote installation and initial configuration via TeamViewer
• Post-installation technical support

How Remote Installation Works

1. Place your order and prepare a compatible Windows computer.
2. Install TeamViewer and arrange a convenient installation time with our technician.
3. We install and configure Hino DX3 and DX2, then verify that the applications open correctly.
4. Connect your compatible adapter to the truck when you are ready to diagnose.

Frequently Asked Questions

Is this Hino truck diagnostic software compatible with Cummins engines?

No. Hino states that DX3 cannot communicate with Cummins engine ECUs. Use Cummins INSITE for the Cummins engine. DX3 can still be useful for supported Hino cab and chassis systems.

Does Hino DX3 include Hino DX2?

Yes. This listing includes both DX3 and DX2/DXII so the appropriate application can be used for supported newer or legacy Hino vehicles.

Can Hino DX3 perform a forced DPR or DPF regeneration?

DX3 provides supported aftertreatment service functions, including regeneration-related procedures on applicable vehicles. Availability depends on the engine, ECU, model year and current vehicle conditions.

Can it program or reflash Hino modules?

Some programming functions may be available with the proper manufacturer access. This listing does not guarantee online programming credentials, subscriptions or calibration files. Contact us with the exact task before ordering.

Which NEXIQ adapter should I use?

NEXIQ USB-Link 3 is the current interface offered by Hino for DX3. USB-Link 2 and other supported RP1210 adapters may also work when the correct driver and vehicle cable are installed.

How do I confirm coverage before buying?

Send us the Hino model, model year, market and engine type. If possible, include the VIN and the diagnostic adapter you plan to use.

Hino DX3 Help and Related Resources

• What Is Hino DX3? Software and adapter guide
• Hino DX3 not connecting? NEXIQ and ECU troubleshooting
• NEXIQ USB-Link 3 driver and installation guide
• NEXIQ USB-Link 2 driver and installation guide
• Diagnostic adapter drivers
• Browse Hino diagnostic software

Technical Support

Need a compatibility check before ordering? Contact Motorsymph Diesel with your truck and adapter details.

• WhatsApp: +51 941 033 487
• Telegram: t.me/motorsymphdiesel
• Email: info@motorsymphdiesel.com