Bendix ACom Pro 2024v2 ABS Diagnostic Software

Bendix ACom Pro 2024v2 is the diagnostic software for Bendix ABS, traction, stability and collision mitigation systems on North American trucks and trailers. When a fault lights up an ABS, stability or Wingman system, ACom Pro is what lets you read it, calibrate the sensors and clear it — work a generic code reader cannot touch.

Supported Bendix Systems

• ABS / ATC / Stability: EC-60 and EC-80 controllers
• Wingman: ACB, Advanced and Fusion collision mitigation
• VORAD radar systems: VS400 / VS500
• Driver assistance: DIU, AutoVue LDWS, BlindSpotter
• Tire and wear monitoring: SmarTire TPMS, ADB2ZX wear sensors
• Trailer ABS: TABS6, EC-30, A18, U1x/2x

What ACom Pro Does

• Read and clear fault codes across supported Bendix systems
• Calibrate sensors, including radar and camera-based safety systems
• Monitor live data from ABS, stability and driver assistance modules
• Run system tests and verify repairs

Required Hardware Interface

• Nexiq USB-Link 2 or 3
• Noregon DLA+ 3.0

The diagnostic adapter is not included and must be purchased separately.

Frequently Asked Questions

Can ACom Pro calibrate Wingman Fusion?

Yes. It supports the Wingman ACB, Advanced and Fusion systems, including the calibration routines these safety systems require after a repair or windshield replacement.

Does it work on trailer ABS?

Yes, it covers Bendix trailer ABS including TABS6, EC-30, A18 and the U1x/2x families.

How is it delivered?

Remote installation via TeamViewer, scheduled at your convenience.

Technical Support

• WhatsApp: +51 941 033 487
• Telegram: t.me/motorsymphdiesel
• Email: info@motorsymphdiesel.com

Bendix Software & Interface Compatibility

Browse our Bendix diagnostic software collection or use the diagnostic interface compatibility finder to check your Nexiq or Noregon adapter before ordering.

Bendix ACom Pro 2024 vs. ACom AE

ACom Pro 2024v2 is a legacy Bendix diagnostic package. Bendix now markets ACom AE as the succeeding generation for current electronic systems. ACom Pro remains relevant when a shop has a confirmed controller and workflow that requires this release, but it should not be presented as universal coverage for every new Bendix ECU.

Before ordering, send us the truck or trailer year, Bendix ECU family and the function you need. We will help determine whether this ACom Pro version is appropriate or whether a current subscription tool is required.

For a feature-by-feature explanation of the current and legacy generations, read our Bendix ACom Pro vs ACom AE diagnostic software comparison.

Typical Bendix ABS Diagnostic Workflow

1. Connect the RP1210 adapter and the correct truck or trailer cable.
2. Turn the ignition on and confirm that the adapter has vehicle power.
3. Select the correct Bendix controller and save the initial fault report.
4. Review active faults, wheel-speed values and available live parameters.
5. Repair the wiring, sensor, pneumatic or mechanical problem.
6. Run the supported component test or calibration and clear eligible inactive faults.

ABS and collision-mitigation systems are safety-critical. Do not clear codes or perform a calibration until the physical repair and installation measurements have been verified.

Adapter and Cable Checklist

• A properly installed NEXIQ USB-Link or Noregon DLA RP1210 driver
• The correct 6-pin, 9-pin or trailer diagnostic cable for the vehicle
• Stable vehicle voltage and reliable USB communication
• Windows administrator access for the remote installation

Related Bendix and Truck Diagnostic Tools

• Bendix diagnostic software collection
• Diagnostic interface compatibility finder
• RP1210 adapter driver hub
• 25-program truck diagnostic bundle

Bendix and ACom are trademarks of their respective owner. Coverage and calibration availability depend on the exact ECU and software generation.